Cem-Plast

CEM-PLAST is premixed plaster designed to provide smooth and compact surfaces both internal and external and is a blend of Portland cement, supplementary cementitious material, selected graded sand and polymer additives in the right proportion for perfect compactness and desired smoothness of the surface.

RMP is silt free and organic content free, graded sand provides best quality durable masonry surfaces with negligible cracks.

Shelf Life

12 months from date of production if stored properly in original, unopened, and undamaged sealed packaging.

Storage Conditions

Store in dry conditions at temperatures between +5 °C and +30 °C.

Density

1.65 kg/L

Compressive Strength

28 days ~6 N/mm2

Tensile Adhesion Strength

28 days ~0.3 N/mm2

Mixing Ratio

Water: Cem-Plast 6 – 6.4 L: 40 kg (by weight)
Water: Cem-Plast 1: ± 3.5 (by volume)

Layer Thickness

For red brick laying:10 mm (max.thickness 15mm)
For plastering: 10 mm (max. thickness 15 mm)

Ambient Air Temperature

+8 °C to +40 °C

Pot Life

1 hours (at +30 °C)

Waiting Time / Overcoating

As brick adhesive before plaster – after 24 h
As plaster before skim coat – after 7 days

Plaster

Light brick: ~2.1 m2 per 40 kg bag
(based on 10 mm thickness)
*Depend on substrate surface profile

Mixing

  • Pour 6 – 6.4 Liter of water into mixing vessel then add Cem-Plast slowly and mix properly
  • Mixing time is ~3 minutes. A slow speed mixer is recommended (300 – 600 rpm)

Application

As Brick Adhesive
  • Apply with a scoop then fix the brick. Proceed to apply while the product is still wet.
  • Waiting time before plaster application minimum 24 hours.
As Plaster
  • Apply with a trowel.
  • Waiting time before skim coat application minimum 7 days.

Cleaning Of Equipment

  • Clean all tools and application equipment with water immediately after use.
  • Hardened / cured material can only be mechanically removed.

Block-Fix

Block-Fix is a high Strength adhesive designed for swift and secure laying of AAC blocks with thin joints made from a blend of cement, graded sand and polymers making the surface water resistant with coatings as thin as 2mm.

Key Features

  • High Bond strength
  • Adhesive strength of over 0.41 MPa
  • High Thermal insulation
  • Premixed
  • No shrinkage
  • Impact resistance
  • Zero wastage
  • No curing needed

Chemical Base

Cementitious mortar modified with polymers

Shelf Life

6 months from date of production

Storage Conditions

Stored properly in original unopened, sealed, and undamaged packaging in dry and cool conditions.

Density

Bulk Density: ~1.33 kg/l (at +27°C)

Layer Thickness

3-4 mm

Ambient Air Temperature

+5°C min. / +45°C max.

Substrate Temperature

+5°C min. / +45°C max.

Pot Life

90 minutes

Consumption

~3 -4 kg powder required / Sqm for 3 mm average thickness.

Mixing

Water: Powder = 0.22 to 0.24 by weight (6.6l to 7.2l) water per 30 kg bag). Mixing Time: 3 minutes minimum.

Cleaning Of Tools

Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be removed mechanically.

Aquashield-EC

Two component cementitious waterproofing made from cementitious binder, selected aggregates, special additives and synthetic polymers in water dispersion.

Key Features

Adheres to substrate and gives waterproof layer for the base in presence of upto 1.5 bar of pressure

Applications

  • Waterproofing of internal and external surfaces of masonry
  • Waterproofing for reinforced concrete structures such as swimming pools and lifts

Cautions

  • Do not use for internal condensation
  • Do not use gypsum or plaster boards, painted surfaces, wood, or fiber cement.
  • Do not mix with admixtures, cement, or aggregates
  • Do not use on surfaces subject to deformation

Shelf Life

12 months from date of production if stored properly in original, unopened, and undamaged sealed packaging.

Abrasion Resistance

7 days 55 L/mil
73 °F (23 °C) & 50 % R.H.

Tensile Adhesion Strength

7 days concrete substrate failure

Diffusion Resistance to Water Vapor

7 days at 73 °F (23 °C) and 50 % R.H.

1 coat 27 grains/hr/ft2
2 coats 24 grains/hr/ft2

Layer Thickness

Min. Max.
8 mils (0.2 mm) 16 mils (0.4 mm)

* Thicker application can result in cracking.

Ambient Air Temperature

> 45 °F (7 °C)

Substrate Temperature

> 45 °F (7 °C)

Pot Life

4 hours

As the temperature will affect the pot life, application temperature:

  • Above 73 °F (23 °C) will reduce the pot life and workability
  • Below 73 °F (23 °C) will extend the pot life and workability

Final Set Time

30 minutes tack-free time

Waiting / Recoat Times

2 hours minimum between coats

Coverage

1st coat 100–150 ft/gal
2nd coat 150–200 ft/gal

* (Coverage figures do not include allowance for surface profile and porosity or
material waste)

Mixing

  • All mixing must be done mechanically using a low-speed drill (400–600 rpm) and Sika paddle.
  • Place approximately 1/2 Component ‘A’ into a clean mixing container.
  • While mixing, slowly add all of Component ‘B’ and continue to mix until you achieve a uniform paste with no lumps.
  • Be sure to scrape down sides of the mixing container currently.
  • Add remainder of Component ‘A’ and continue to mix until uniformly blended.

Curing Treatment

  • As per ACI recommendations for Portland cement concrete, curing is required.
  • Moist cure with wet burlap and polyethylene, a fine mist of water.
  • Curing compounds adversely affect the adhesion of following lifts of mortar, leveling mortar, or protective coatings
  • Moist curing should commence immediately after finishing. Protect newly applied Aqua-shield EC from direct sunlight, wind, rain and freezing.

CEM-SHIELD

CEM-SHIELD Integral waterproofing liquid admixture for concrete and mortar which is used for to minimise permeability and increase the waterproofing properties of concrete and cement sand mortars for critical applications like roof slabs and screeds, basements, external plastering, bathroom floors & walls, water tanks, sumps, drains etc.

Usages and Advantage

  • Liquid admixture: Instant and complete dispersion throughout the mix.
  • Uniform waterproofing throughout concrete matrix.
  • High efficiency: Dramatic reduction in permeability of concrete/ mortar Improved
  • Workability improves compaction of concrete and mortar, even where harsh sands or aggregates are used.
  • Improved concrete quality, Minimises porosity and honey-combing. Produces dense homogenous concrete.

Standard Compliance

CEM-SHIELD complies with IS:2645-2003.

Technical support

Brij Additives will provide a technical advisory service for on-site assistance and advice on mix design, admixture selection, evaluation trials and dispensing equipment on request and required basis.

Health and safety instructions

CEM-SHIELD does not fall into the hazard classifications of current regulations. However, it should not be swallowed or allowed to come into contact with skin and eyes. Suitable protective gloves and goggles should be worn. Splashes on the skin should be removed with water. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. If swallowed seek medical attention immediately – do not induce vomiting. For further information consult the Material Safety Data sheet available for this product.

Fire

CEM-SHIELD is water based and non- flammable.

Cleaning and disposal

Spillages of CEM-SHIELD should be absorbed onto sand, earth or vermiculite and transferred to suitable containers. Remnants or vermiculite and transferred to suitable containers. Remnants should be hosed down with large quantities of water. The disposal of excess or waste material should be carried out in accordance with local legislation under the guidance of the local waste regulatory authority.

Brij Safecrete (Superlatex)

Brij safecrete is an Acrylic Polymer which mixes with cement and provides a seamless waterproof coating to concrete and masonry surfaces. It can be used as a waterproofing or protective coating.

Product Pros and Use

  • Develops excellent bond to most building materials.
  • Can be applied in uniform thickness to horizontal and vertical surfaces.
  • Improves mechanical & physical properties of the coating system when used in conjunction with cement.
  • Reduces or prevents salt penetration into concrete.
  • Resistance to ultraviolet light and chemicals ranging from mild acids to strong alkalis.
  • It Is highly impermeable in continual wet conditions.
  • It Is non-flammable and does not give off toxic gases, even when exposed to fire.
  • Non toxic

Brij safecrete is used for surface treatment, protecting, waterproofing, repairing concrete and masonry. It is also suitable for waterproofing of basements, toilets, terraces, roofs, swimming pools, water towers as well as general concrete repairs and protection of concrete against corrosion, salt attack and much more.

Technical Support

Brij Additives provides a technical advisory service for on-site assistance where we advise on admixture selection, evaluation, trials and dispensing equipment. Technical data and guidance can be provided for Silcrete and other products.

Method Of Application

Remove all laitance, oil, grease, mold oil, curing compound, etc. using a wire brush or for large floor areas, a scrubbing machine. Ensure that reinforcing steel is clean and free from grease or oil, remove scale and rust. When repairing damaged concrete, ensure that the exposed surface is smooth and sound.

All concrete surfaces should be thoroughly damp prior to the application of Brij safecrete coating. It can be achieved by pouring water on flat surface or by spraying water on vertical/inclined surfaces. Before the coat of Brij safecrete, please make sure that any stagnant water is removed so that surface is only damp. In no case should there be stagnant water.

Mixing

Brij safecrete polymer is mixed with neat fresh cement in the ratio of 1:2 by weight. The mix has to be stirred thoroughly until smooth homogeneous slurry is obtained. Any lump in the mix should be removed or mixed thoroughly again.

Coating

The mix has to be applied by brush on rendered surfaces after its damp. Two or more coats are recommended. First coat should be allowed to air dry for 5-6 hours prior to applying a second coat.

Curing

During the first 12 hours of curing, it must be protected from abrasion, rain and other adverse conditions. No traffic shall be allowed on a Brij safecrete treated surface within 48 hours after application. After application of final coat of Brij safecrete, initial air drying must be done for 2-6 hours.

During this period no water is to be used for curing. If unusual conditions such as high temperature, low humidity and high wind condition arises, the coating must be covered with polythene sheet to avoid rapid drying of the coating. After a maximum period of 6 hours of the final application, moist curing must be done for the next 24 hours by way of spraying water on Brij safecrete coating. During this period at no point in time should the Brij safecrete coating should be left neither completely dry nor submerged in water. After the moist curing, the Brij safecrete coating can be air dried for 3 days before submersion in water if required for usage.

Cautions

Brij safecrete system must be applied at temperatures between 10⁰ C to 40⁰ C. Brij safecrete should not be used without the addition of cement.

Tools and Equipment Cleaning

All tools should be clean with water immediate after use.

Shelf Life

12 months if stored under normal warehouse conditions below 35° C, in unopened, airtight containers.

Health and Safety

Brij safecrete is non-toxic, however gloves and goggles are recommended to be worn to avoid contact in sensitive areas. Any splashes to the skin or eyes should be washed off with clean water. In the event of prolonged irritation, please seek medical advice. Should use a dust mask while handing the powder.

Fire

Brij safecrete is Nonflammable.

Weather Pro+250

Weather Pro+250 Integral waterproofing liquid admixture for concrete and mortar which is used to minimise permeability and increase the waterproofing properties of concrete and cement sand mortars for critical applications like roof slabs and screeds, basements, external plastering, bathroom floors, water tanks, sumps, drains etc.

Usages and Advantage

Liquid admixture:
  • Instant and complete dispersion throughout the mix.
  • Uniform waterproofing throughout concrete matrix.
  • High efficiency: Dramatic reduction in permeability of concrete/ mortar Improved
  • workability: Improves compaction of concrete and mortar, even where harsh sands or aggregates are used.
  • Improved concrete quality: Minimises porosity and honey combing. Produces dense homogenous concrete.

Standard Compliance

Weather Pro+250 complies with IS:2645-2003.

Technical support

Brij Additives provides a technical advisory service for on-site assistance and advice on mix design, admixture selection, evaluation trials and dispensing equipment.

Health and Safety Instructions

Weather Pro+250 does not fall into the hazard classifications of current regulations. However, it should not be swallowed or allowed to come into contact with skin and eyes. Suitable protective gloves and goggles should be worn. Splashes on the skin should be removed with water. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. If swallowed seek medical attention immediately – do not induce vomiting. For further information consult the Material Safety Data sheet available for this product.

Fire

Weather Pro+250 is water based and nonflammable.

Cleaning and Disposal

Spillages of Weather Pro+250 should be absorbed onto sand, earth or vermiculite and transferred to suitable containers. Remnants or vermiculite are transferred to suitable containers. Remnants should be hosed down with large quantities of water. The disposal of excess or waste material should be carried out in accordance with local legislation under the guidance of the local waste regulatory authority.

Features & Benefits

  • Better Dampness Prevention
  • Enhance concrete strength
  • Denser concrete
  • Better prevention from rusting
  • Reduces water cement ration
  • Easy-to-mix
  • Higher durability