Product Category: Admixture Solutions

Silkon Flowmix PC550 is an Advanced Low Viscosity High Performance Superplasticizer, based on Poly carboxylic technology this is a unique combination of the latest generation superplasticizers, based on a Poly carboxylic ether polymer with long lateral chains VMA and Rheology modifier inbuilt, this greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in flowable concrete. Silkon Flowmix PC 550 combines the properties of water reduction and workability retention. It allows the production of high- performance concrete and/or concrete with high workability.

Uses & Advantages

Silkon Flowmix PC550 is a high performance superplasticizer intended for applications where high-water reduction and long workability retention are required, and it has been developed for use in:

• Pumped concrete and Value-added concrete
• Concrete requiring long workability retention
• High performance concrete up to M200 Grade concert
• Low viscosity suitable for pumping of different grades of concrete to higher floors
• Higher E modulus
• Improved adhesion to reinforcing and pre-stressing steel
• Better resistance to carbonation
• Lower permeability
• Better resistance to aggressive atmospheric conditions
• Reduced shrinkage and creep
• Increased durability

Standard Compliance

Silkon Flowmix PC550 complies with IS:9103- 1999 (2007). It also complies with ASTM C494 Type G depending on the dosage used

Technical Support

Brij Additives provides a technical advisory service for on-site assistance and advice on mix design, admixture selection, evaluation trials and dispensing equipment.

Health And Safety Instructions

Silkon Flowmix PC-550 does not fall into the hazard classifications of current regulations. However, it should not be swallowed or allowed to come into contact with skin and eyes. Suitable protective gloves and goggles should be worn. Splashes on the skin should be removed with water. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. If swallowed seek medical attention immediately – do not induce vomiting. For further information consult the Material Safety Data sheet available for this product.

Fire

Silkon Flowmix PC 550 is water based and non- flammable.

Cleaning and Disposal

Spillages of Silkon Flowmix PC 550should be absorbed onto sand, earth or vermiculite and transferred to suitable containers. Remnants or vermiculite and transferred to suitable containers. Remnants should be hosed down with large quantities of water. The disposal of excess or waste material should be carried out in accordance with local legislation under the guidance of the local waste regulatory authority.

Test Report

Please follow the link to view or download our test certifications from National Council for Cement and Building Materials. Click Here.

Silkon Flowmix PC450 is an Advanced Low Viscosity High Performance Super-plasticizer, based on Polycarboxylic technology this is a unique combination of the latest generation of super plasticizers, based on a polycarboxylic ether polymer with long lateral chains VMA and Rheology modifier inbuilt, which greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the amount of water in flowable concrete. Silkon Flowmix PC 450 combines the properties of water reduction and workability retention. It allows the production of high performance concrete and or concrete with greater workability.

Uses & Advantages

Silkon Flowmix PC 450 is a high-performance superplasticizer intended for applications where high-water reduction and long workability retention is required, and it has been developed for use in:

• Self-compacting concrete
• Pumped concrete
• Concrete requiring long workability retention
• High performance concrete
• Low viscosity suitable for pumping of different grades of concrete to higher floors
• Higher E modulus
• Improved adhesion to reinforcing and prestressing steel
• Better resistance to carbonation
• Lower permeability
• Better resistance to aggressive atmospheric conditions
• Reduced shrinkage and creeping
• Overall increased durability

Standard Compliance

Silkon Flowmix PC450 complies with IS:9103- 1999 (2007). It also complies with ASTM C494 Type G depending on the dosage used.

Technical Support

Brij Additives provides a technical advisory service for on-site assistance and advice on mix design, admixture selection, evaluation trials and dispensing equipment.

Cleaning and Disposal

Spillages of Silkon Flowmix PC 450 should be absorbed onto sand, earth or vermiculite and transferred to suitable containers. Remnants or vermiculite and transferred to suitable containers. Remnants should be hoisted down with large quantities of water.

The disposal of excess or waste material should be carried out in accordance with local legislation under the guidance of the local waste regulatory authority.

Health And Safety Instructions

Silkon Flowmix PC450 does not fall into the hazard classifications of current regulations. However, it should not be swallowed or allowed to meet skin and eyes. Suitable protective gloves and goggles should be worn. Splashes on the skin should be removed with water. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. If swallowed seek medical attention immediately –It does not induce vomiting. For further information consult the Material Safety Data sheet available for this product.

Fire

Silkon Flowmix PC 450 is water based and non- flammable.

Test Report

Please follow the link to view or download our test certifications from National Council for Cement and Building Materials. Click Here.

Silkon Flowmix PC 350 is an advance low viscosity high performance super plasticizer, based on Poly carboxylic technology which is intended for applications where high water reduction and long workability retention are required.

Silkon Flowmix PC 350 is a unique combination of the latest generation super plasticizer, based on PCE Based technology with long lateral chain. This greatly improves cement dispersion. At the start of mixing process, a steric hindrance dispersion occurs and cement particles start dispersing. This mechanism considerably reduces water demand in flowable concrete.

Silkon Flowmix PC 350 is a super plasticizing admixture to produce flowable or pumpable concrete up to M40 grade, without bleeding and segregation when added to the concrete mix having slump of at least 25mm without admixture.

Usages and Advantage

• Pumped concrete
• Concrete requiring long workability retention
• Low viscosity suitable for pumping of different grades of concrete to higher floors
• Improved adhesion to reinforcing and prestressing steel & Better resistance to carbonation
• Lower permeability
• Better resistance to aggressive atmospheric conditions
• Reduced shrinkage and creep
• Increased durability

Standard Compliance

ASTM C 494 – Type G IS 9103: 1999

Technical Support

Brij Additives provides a technical advisory service for on-site assistance and advice on mix design, admixture selection, evaluation trials and dispensing equipment.

Health And Safety Instructions

Silkon Flowmix PC350 does not fall into the hazard classifications of current regulations. However, it should not be swallowed or allowed to come into contact with skin and eyes. Suitable protective gloves and goggles should be worn. Splashes on the skin should be removed with water. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. If swallowed seek medical attention immediately – do not induce vomiting. For further information consult the Material Safety Data sheet available for this product.

Cleaning and Disposal

Spillages of Silkon Flowmix PC 350 should be absorbed onto sand, earth or vermiculite and transferred to suitable containers. Remnants or vermiculite and transferred to suitable containers. Remnants should be hosed down with large quantities of water. The disposal of excess or waste material should be carried out in accordance with local legislation under the guidance of the local waste regulatory authority.

Test Report

Please follow the link to view or download our test certifications from National Council for Cement and Building Materials. Click Here.

Flowmix PC100 is an advanced technology based low viscosity Super plasticiser, based on Polycarboxylic technology for Precast Concrete and early strength concrete elements or structure. Supercast PC100 complice to IS:9103:1999 as a Superplasticizer and ASTM C 494 Type F and Gdepending on dosage.

Advantages

Flowmix PC100 is a high performance precast super plasticizer intended for applications where reduction in cycle time and early strength are required, and it has been developed for use in Precast concrete elements like Hollow core slabs Block, Cement Tiles ,Kerbstones , Edgings ,other items for garden landscape design ,Building blocks , bricks etc

• Concrete requiring high early strength without steam curing
• High performance concrete
• Low viscosity admixture suitable for precast elements Suitable for concrete having cement replacements and low water cement ratio
• Provides high early strength without increase in cement content or reduction in workability
• Ideal for precast concrete production Early de-shuttering will result in increased productivity
• Improves surface finish Minimizes damage due to early handling
• Better resistance to Carbonation
• Reduces Shrinkage and Creep
• Reduces efflorescence

Technical support

Brij additives provides on-site technical service for assistance and advice on mix design, admixture selection, evaluation trials etc.

Health and safety

Flowmix PC100 does not fall into the hazard classifications of current regulations. However, it should not be swallowed or allowed to come in contact with skin or eyes. Suitable protective gloves and goggles should be worn.

Fire

Flowmix PC100 is water based and nonflammable.

Cleaning and disposal

Spillage of Flowmix PC100 should be absorbed onto sand, earth or vermiculite and transferred to suitable container. Remnants should be hosed down with large quantity of water. The disposal of excess or waste material should be carried out in accordance with local legislation under the guidance of the local waste regulatory authority